落球回弹试验仪,介电击穿强度测定仪

ASTMD495耐高压低电流电弧放电试验机

ASTMD495耐高压低电流电弧放电试验机

日期:2025-11-14 18:47
浏览次数:2193
摘要:
ASTMD495耐高压低电流电弧放电试验机

高电阻值小工作电流可靠性耐压仪(耐脉冲可靠性耐压仪)-(换算机调节)

High voltage low current tester (arc resistance tester) - (computer control)

食商品品牌称:耐电弧试验机

Product name: electric arc resistance tester

产品的具体型号:NDH-A

Product model: NDH - A

拥有标准规范:GB/T 1411-2002《气体绝缘电阻用料耐高低平直流电弧光发出电的试验报告》(一样IEC  61621-1997)及ASTM D495等准则的规定定制制做的,并适合IEC 149、UL 746A等试验报告最简单的方法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

主要是采用条件及能力:

本耐压机是决定应用软件于主轴电机、电热器和家庭型电热器等职业的高压电工用金属、环氧聚酯树脂胶和接地漆等接地板材的耐弧光能力评比,主在固体颗粒接地板材如:金属、聚酯薄膜、环氧聚酯树脂、白云母、卫浴陶瓷、窗玻璃、接地油、接地漆、纸箱等媒质的耐弧光能力检验;

本试验报告机由换算机调整加载,都可以显示信息某一调查英文设计环境及调查英文设计用时,调查英文设计完毕后并导出某一调查英文设计资料,并可打印出.标准单位试验情况汇报。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 滤油机为前后集成组成,中下部为操控程序,上面为现场实验箱。

2 本品牌用到*新智慧操控技术性,经由选择程序代码(IEC或ASTM)可自然完成现场实验,并在笔记本电脑软件显现试验装置的过程 和成果。

3 **耐热性健康,抗干拢能力素质强,各种测试可靠性强,精密程度高。

二:Functional features:

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 脉冲通断精力不确定度:不低于 ±10ms

2 调压器储电量:2kVA

3 额定的试验台电阻值:12.5kV

4 实验电压降导致精度:±3%

5 电压抑制精度等级:±10%  直流电压预估表面粗糙度:1.5%

6 工业对岩样压差:(0.5±0.05)N

7 金属电极原料:钨棒

8 参比电极时间:(6.35±0.1)mm(IEC)

               (6.0±0.1)mm(ASTM)

9 选用生活环境溫度:(23±2)℃

10 采用生态环境绝对湿度:(50±5)%

11 电源模块:220V±5%  50Hz  10A

12 现场实验    技术:   行业标准/美标/10 mA 连续式/20 mA 不间断/30 mA不间断/40 mA间断

13 应力测试程度以下的:

环节段

焊弧电流量

mA

弧光通断时光s

各程序流程图段快速周期s

应力测试总日子s

 

 

IEC 61621

ASTM D495

 

 

1

10

1/8s通 7/8s断

1/4s通 7/4s断

60

60

2

10

1/4s通 3/4s断

1/4s通 3/4s断

60

120

3

10

1/4s通 1/4s断

1/4s通 1/4s断

60

180

4

10

维持通

60

240

5

20

连继通

60

300

6

30

陆续通

60

360

7

40

连继通

60

420

Three main technical parameters:

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

项目编号

称呼

总量

微信备注

01

耐焊弧检测仪

一个

 

02

工业平台

设计一套

 

03

电极材料支架

做一套

 

04

电源线通信电缆

几套

 

05

跨接放**

一枝

 

06

电流值毫安表

两台

 

07

PC测控APP

一台

 

08

制样架

一根

 

09

金属电极高度准则块

2块

 

10

斜度规格块

2块

 

11

陶瓷厂家片

2片

 

12

喷墨word佳能打印

1台

该品牌

13

计算方式机

1台

高端品牌

14

运行讲解书

1份

 

15

合格达标证

1份

 

 

Four configuration:

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 物品具体型号:

NDH-A    耐焊弧耐压试验仪-微机把握

NDH-B    耐电孤测试仪-触碰屏管控

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!

落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪